burkert 8041電磁流量計特點：

• 無移動部件的傳感器
• 傳送器和/或兩點式調節運行
• 通過 Teach-In 自動校準zui終值
• 可運行 CIP
• 經 FDA 許可的材料

•  
• burkert 8041電磁流量計：8041 型流量傳送器適合公稱通徑為 DN 06 至 DN 400 的管道以及電導率大于 20 μS/cm 的液體。電磁流量測量儀 8041 由一個電子設備模塊和一個傳感器構成，傳感器的配件由 PVDF 或不銹鋼制成。它裝配有一個 4-20 mA 電流輸出端、一個頻率輸出端和一個繼電器輸出端。借助于 5 個 DIP 開關、一個按鈕和一個 10 區 LED 圖像調整設備。帶有不銹鋼傳感器的版本，適合較高的介質壓力 (PN16) 和介質溫度 (150 °C)。寶德電磁流量計，寶德8041流量計，burkert 8041，8041型寶德流量計，寶德8041。

The sensor fitting Type S056 consists of a stainless steel pipe section internally lined with insulating material. Two electrodes mounted opposite to each other on the internal surface of the tube generate an electrical signal. The coils generating the magnetic field are placed outside the pipe. The signal generated by the sensor fitting S056 must be amplified and processed by an electronics (SE56) which outputs an electrical signal proportional to the fluid flow velocity respectively to the flow rate. Faraday’s induction law is the basis for this magnetic flow measurement.

如果你對burkert 8041電磁流量計感興趣，想了解更詳細的產品信息，填寫下表直接與廠家聯系：