burkert A 3.0 FKM MS 24V DC 00126091和burkert 00125309電磁閥是burkert 6013的訂貨號，寶德電磁閥126091介質壓力為0-6bar，寶帝電磁閥6013-126091連接方式為G螺紋，寶德6013 A 3.0 FPM是標簽上的一些參數。

burkert A 3.0 FKM MS 24V DC 00126091材質：

技術參數：

Body material
Type 6013
Type 6013 A
Brass, stainless steel 1.4305
Brass, stainless steel 1.4305
Seal material FKM, PTFE/Graphite (EPDM on request)
Analysis version
Type 6013 A
Silicon, oil and fat free version
Tightness <10-4 mbar l/s
Limit value for risidual carbon
Type 6013 A <0.2 mg/dm²
Medium
Type 6013
Type 6013 A
• Technical vacuum
• Neutral gases and liquids
(e.g. compressed air, water, hydraulic oil)
• Neutral medium, which does not attack the body
and seal materials (see chemical resistance chart)
Medium temperature
FKM
PTFE/Graphite
FKM, Circuit function B
-10 to +100 °C (PA coil) till 120ºC (Epoxy coil)
-40 to +180 °C (see chemical resistance chart)
-10 to 100°C (AC) -10 to 120°C (DC)
Ambient temperature Max. +55 °C
Viscosity Max. 21 mm²/s
Port connection
Type 6013
Type 6013 A
G1/8, G1/4, G3/8, sub-base (SFB)
G1/8, G1/4
Operating voltage
Type 6013
Type 6013 A
24 V DC, 24 V/50 Hz, 230 V / 50 Hz
24 V DC, 230 V / 50 Hz (other voltages on request)
Voltage tolerance ± 10%
Duty cycle/single valve
With block assembly on manifold
100% continuous rating
Intermittent operation 60% (30 min) or with 5 W coil on
request
Electrical connection
Tag connector acc. to DIN EN 175301-803 Form A
(previously DIN 43650) for cable plug Type 2508
(see accessories)
ATEX/IECEx version with 3 m moulded cable
Installation As required, preferably with actuator upright
Assembly No oils, fats or silicone to be used during installation
Protection class IP65 with cable plug, ATEX/IECEx junction box version
and cable connection version

如果你對burkert A 3.0 FKM MS 24V DC 00126091感興趣，想了解更詳細的產品信息，填寫下表直接與廠家聯系：